This is an order from a Korean Laser Repair Service Center， 5 zema laser hair removal machine’s handpiece for repairs，the main problem of these diode laser stacks is Some or all of diode bars were burned.
| Repairing procedure | Advantages |
| >Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. | >Save Money. Replace the broken diode stack only. Low cost and convenient |
| >Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. | >Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before |
| >Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece. | >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you. |
Zema Laser Diode Stack Specifications
| Model No | VS-MI-80-10-Zema |
| Application | Zema Laser Hair Removal Machine Handpiece Repair |
| Operation Mode | CW |
| Number of submounts | 10 Bars |
| Power per submounts | 100W |
| Central wavelength at 25℃ | 808 ± 5nm |
| Typical Operation current | 90A |
| Typical Threshold current | 15A |
| Maximum Operating Voltage | 20V |
| Fast Axis Divergence (FWHM) | 39º |
| Slow Axis Divergence (FWHM) | 8º |
| Expected lifetime | >10000 Hours |
| Typical pitch per bar | 1.8mm |
| Cooling | |
| Flow rate | 0.3L/min ±10% / Bar |
| Water Temperature | 25+-3°C |
| Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
| cooling system | Do not use any material that combination with copper would form galvanic elements |
Also you can buy a new one for your zema equipment handpiece，we have designed the structural parts of this laser stack and got good feedback on the market.
Zema Handpiece’s Diode Laser Stack Dimension:
Reviews
There are no reviews yet.