No products in the cart.

One-stop laser shopping website

[email protected]

Whatsapp:+86-18518945778 / 86 13681200145


No products in the cart.

Home Laser Diode Stack & Repair Services Laser Diode Stack Repair Syneron Laser Repair 8bars Syneron Laser Diode Stack Repair Service Model-B

8bars Syneron Laser Diode Stack Repair Service Model-B


This VS-MI-100-8-Syneron B is another 8 bars laser stack special for syneron-candala 808nm diode laser hair removal handpieces. Thers is a little difference in size between Model A.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.

Repairing Solution:

Repairing procedure Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. >Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. >Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece. >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

Syneron Laser Stack Model-B Specification:

Model No. VS-MI-100-8-Syneron-B
Application Syneron-candala 808nm diode laser hair removal Handpiece Repair And Replacement
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 8bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 60A
Maximum Operating current 90A
Typical Threshold current 15A
Maximum Operating Voltage <24V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10000hours
Typical pitch per bar 1.8mm
Cooling requirement
Flow rate 3.6L/min +-10%
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

Syneron Laser Diode Stack Model-B Dimension

8bars 800w laser diode stack/head design dimension


There are no reviews yet.

Be the first to review “8bars Syneron Laser Diode Stack Repair Service Model-B”

Your email address will not be published. Required fields are marked *

Customers also loved