We have repaired many aroma laser hair removal device’s handpiece for customers,there are 3 different types laser stack for aroma handle，such as 300w，600w，etc.
We have a 100% successful rate in aroma handle repair, and you can customize a new laser stack for aroma hand piece.
| Repairing procedure | Advantages |
| >Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. | >Save Money. Replace the broken diode stack only. Low cost and convenient |
| >Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. | >Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before |
| >Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece. | >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technology are open to you. |
300W /600W Aroma diode laser stack / handle Repair details:
This diode laser hair removal handpiece model F is made of 3pcs or 6pcs diode bar with micro channel cooler. Total optice power is 300W or 600W . The laser handle piece will be matched for Aroma Grand of CHEVEUX from DAEJU MEDICAL ENGINEERING Company.
Service mode: Repair the broken diode laser in the handpiece. Such as replace new laser stack, test TEC peltier, cleaning and so on.
Specification
| Model No. | Aroma Diode laser hair removal handpiece-Model F |
| Application | 808nm/810nm diode laser hair removal machine |
| Operation Mode | CW |
| Power per submounts | 100W |
| Number of submounts in one stack | 3bars/6bars |
| Central wavelength at 25℃ | 808 ± 5nm |
| Typical Operation current | 60A |
| Maximum Operating current | 90A |
| Typical Threshold current | 15A |
| Maximum Operating Voltage | <12V |
| Fast Axis Divergence (FWHM) | 39º |
| Slow Axis Divergence (FWHM) | 8º |
| Operation Condition | non-condemsing atmosphere, cleaning room |
| Expected lifetime | 10000hours |
| Typical pitch per bar | 1.8mm |
| Cooling requirement | |
| Flow rate | 1.5L/min +-10% |
| Water Temperature | 25+-3°C |
| Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
| cooling system | Do not use any material that combination with copper would form galvanic elements |
3bars 300w Aroma Laser Handpiece Repair
6bars 600w Aroma Laser Handpiece Repair
6bars 600w Aroma Laser Handpiece Repair
diode laser stack of aroma handpiece dimension:
Reviews
There are no reviews yet.