No products in the cart.

One-stop laser shopping website

[email protected]

Whatsapp:+86-18518945778 / 86 13681200145


No products in the cart.

Home Laser Diode Stack & Repair Services Laser Diode Stack Repair GT Laser Repair 10bars GT Macro Channel Cooling Diode Laser Stack Repair/Replacement

10bars GT Macro Channel Cooling Diode Laser Stack Repair/Replacement


GT 10bars laser diode stack for repair and replacement
This diode laser stack 10bar Model C for hair removal which has 10bars with a aluminum shell. The water hole is at the bottom. The electrode is on the back.
It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755nm, 808nm and 1064nm.
This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

Repairing procedure Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. >Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. >Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece. >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.


Model No. VS-MA-10-1.0-Model C
Application laser hair removal handpiece Repair And Replacement
Operation Mode CW
Power per submounts 50W
Number of submounts in one stack 10bars
Central wavelength at 25℃ 808 ± 2nm
Typical Operation current 40A
Maximum Operating current 50A
Typical Threshold current 8A
Maximum Operating Voltage <20V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10 millions shots
Typical pitch per bar 2mm
Cooling requirement
Flow rate >3.5L/min
Water Temperature 27+-3°C
Water Quality pure water
cooling system Do not use any material that combination with copper would form galvanic elements

gt 10bars macro channel cooling laser diode stack dimension


There are no reviews yet.

Be the first to review “10bars GT Macro Channel Cooling Diode Laser Stack Repair/Replacement”

Your email address will not be published. Required fields are marked *

Customers also loved