Alma Soprano 12bars Laser Stack Repairing And Replacement (blue side plate)

This VS-MI-60-12-AlmaSoprano-B is Alma Soprano 12 bar laser stack with blue side plate. The electrodes are on the back of the stack.
It is used for Alma Soprano handle piece repairing and replacement.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.

Model No. VS-MI-60-12-Alma Soprano-B
Application Alma Soprano Handle Piece Repair And Replacement
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 12bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 60A
Maximum Operating current 90A
Typical Threshold current 15A
Maximum Operating Voltage <24V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10000hours
Typical pitch per bar 1.8mm
Cooling requirement
Flow rate 3.6L/min +-10%
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

Leave a Reply

Your email address will not be published.