300W / 600W Aroma Laser Hair Removal Machine Handpiece Repair / Replacement

We have repaired many aroma laser hair removal device’s handpiece for customers,there are 3 different types laser stack for aroma handle,such as 300w,600w,etc.
We have a 100% successful rate in aroma handle repair, and you can customize a new laser stack for aroma hand piece.

300W / 600W Aroma Laser Hair Removal Machine Handpiece Repair / Replacement

Repairing procedure Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. >Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. >Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece. >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technology are open to you.

300W /600W Aroma diode laser stack / handle Repair details:
This diode laser hair removal handpiece model F is made of 3pcs or 6pcs diode bar with micro channel cooler. Total optice power is 300W or 600W . The laser handle piece will be matched for Aroma Grand of CHEVEUX from DAEJU MEDICAL ENGINEERING Company.
Service mode: Repair the broken diode laser in the handpiece. Such as replace new laser stack, test TEC peltier, cleaning and so on.

300w and 600w aroma didoe laser hair removal machine handpiece repair process

Specification

Model No. Aroma Diode laser hair removal handpiece-Model F
Application 808nm/810nm diode laser hair removal machine
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 3bars/6bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 60A
Maximum Operating current 90A
Typical Threshold current 15A
Maximum Operating Voltage <12V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10000hours
Typical pitch per bar 1.8mm
Cooling requirement
Flow rate 1.5L/min +-10%
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

3bars 300w Aroma Laser Handpiece Repair

3bars 300w Aroma Laser Handpiece Repair

6bars 600w Aroma Laser Handpiece Repair

6bars 600w Aroma Laser Handpiece Repair

6bars 600w Aroma Laser Handpiece Repair

6bars 600w Aroma Laser Handpiece Repair

diode laser stack of aroma handpiece dimension:

diode laser stack of aroma handpiece dimension

Leave a Reply

Your email address will not be published.